Pedestals
Slim display stands for plants, ceramics and art. Built square and true so nothing wobbles, with a hand-sanded top edge.
Made to your heightXPINMOTION builds pedestals, shoe racks, bookshelves, study tables and side tables by hand — solid timber, honest joinery, and a finish that lasts a lifetime.
Five pieces we build again and again — each one cut, assembled and finished to order in our workshop.
Slim display stands for plants, ceramics and art. Built square and true so nothing wobbles, with a hand-sanded top edge.
Made to your heightTidy entryway storage in two, three or four tiers. Sized to your hallway so shoes, boots and bags finally have a home.
2 to 4 tiersOpen shelving for home libraries and offices. Fixed or adjustable shelves, wall-anchored and finished on every visible face.
Any width or depthSteady desks for long working hours — generous tops, a cable gap at the back and a height that suits how you actually sit.
Single or doubleCompact tables for beside the sofa or bed. Rounded corners, a lower shelf if you want one, and a finish that shrugs off coffee rings.
Round or squareSend us a rough sketch, a photo or just the measurements. We build custom pieces to fit awkward corners, odd heights and specific rooms.

XPINMOTION is a small South African carpentry workshop. Every piece that leaves us has been measured, cut, joined and sanded by hand — no flat-pack, no shortcuts, no veneer pretending to be wood.
We work in solid pine, oak and meranti, chosen for the job at hand. Boards are planed and squared in the workshop, joints are glued and screwed for strength, and every surface is sanded through the grits before it gets its first coat of sealer.
A look at pieces we have built and delivered for homes and offices around the country.





Every piece is made to order, so yours will be built to your room and your measurements.
Request a QuoteMost of our work comes from people who were recommended by someone else.
Tell us what you need and roughly what size. We will come back with a price, a lead time and a few questions about the wood and finish you prefer.
Fill in the form and we will reply within one working day. Prefer to chat? Message us on WhatsApp and send a photo of the space.
XPINMOTION (PTY) LTD is a small carpentry and joinery workshop in Randburg. We build solid wood furniture to order — one piece at a time, by hand, for people who want something that outlasts the room it stands in.
XPINMOTION began the way most workshops do — with one bench in a rented corner of a Kya Sand unit and a handful of tools that had already done a lifetime of work. The first orders came from friends who needed a shelf that actually fitted the wall, then from their friends, and then from people who had seen a piece in someone else's house and wanted the same thing in theirs.
We never set out to be a factory. We set out to build things properly. That meant saying no to chipboard, no to veneer pretending to be oak, and no to "close enough" measurements. It also meant learning to work slowly: choosing each board by eye, letting timber settle before it is cut, and checking a joint twice before the glue goes on.
Today the workshop has grown to a small team of carpenters and a finishing bench that is never quite empty. What has not changed is the way a job starts — with a conversation about your space, your measurements and how you actually use the room. Everything after that is sawdust, patience and a good finish.
Three timbers cover almost everything we build. We will tell you honestly which one suits your piece, your room and your budget.
A warm, pale timber that takes paint and stain beautifully. It is the most affordable solid wood we use and the right choice for shoe racks, utility shelving and children's furniture.
Best valueHard, dense and full of character, with a grain that reads clearly under a clear finish. We use oak for bookshelves, study tables and any piece that has to carry real weight for decades.
Hardest wearingA stable, reddish hardwood that machines cleanly and holds a crisp edge. It is our go-to for pedestals, side tables and joinery that will be stained to match existing furniture.
Great for stainingWe buy timber in boards and pick them ourselves. A board is checked for straightness, for knots in the wrong place and for how the grain will run once it is cut. Anything that will move or cup gets set aside for a smaller job.
Timber is then stacked and left to settle in the workshop before it is planed and squared. It is slower than cutting straight off the delivery truck, but it is the reason our shelves stay flat and our table tops stay true through a Highveld winter and a coastal summer.
Every job follows the same order of work, whether it is a single side table or a full home office fit-out. It is not a complicated process — it is just done without skipping steps.
No staples, no hidden particle board, no structural screws into end grain. If a joint carries weight, it is built to carry weight.
Sealer plus a durable top coat, so coffee rings, homework and muddy shoes are not a crisis. We will tell you how to look after it.
Solid wood can be sanded back and refinished. A piece from us can be repaired and re-oiled years later instead of replaced.
The workshop is a working space, not a showroom. Timber is stacked along one wall, the machines sit in the middle, and the finishing bench runs under the windows where the light is best for spotting a scratch.
Visitors are welcome by appointment. If you are nearby and want to see how a piece is coming along, or feel the difference between pine, oak and meranti in your hand, arrange a time and we will put the kettle on.
Arrange a VisitSend through your measurements, a sketch or a photo of the space. We will reply with a price, a lead time and a recommendation on timber and finish.
Fill in the form and we will reply within one working day. Prefer to chat? Message us on WhatsApp and send a photo of the space.
Request a QuotePedestals, shoe racks, bookshelves, study tables and side tables — the five categories that come off our benches most often. Every one is built to your measurements in solid timber, finished by hand, and delivered ready to live with.
Each category below lists what it is usually built from, the sizes we work in and what it costs to have one made. Prices are starting points for a standard size — your measurements and finish decide the final figure.
A plinth that makes whatever stands on it look deliberate. We build them for plants, sculptures, retail displays and the odd very tall lamp.
Hollow-core or solid build, your choice — a solid plinth carries a heavy pot without a wobble, a hollow one is easier to move when you rearrange the room.
Quote a PedestalBuilt to the width of your wall, not to the width of a box on a shelf. Sloped shelves, a bench top to sit on, or a tall stack for a family of five.
Tell us your skirting height and door swing and we will set the depth so it sits flush against the wall without blocking anything.
Quote a Shoe RackShelves that stay flat. We size the span to the timber so a full row of hardbacks does not bow the board in two years' time.
Fixed or adjustable shelves, wall-anchored as standard. We can also match the height of an existing skirting or cornice so the unit looks built in.
Quote a BookshelfA working surface at the right height, with a drawer that actually runs smoothly and a cable hole where you need it rather than where it was convenient.
Left-handed, right-handed, or a two-person bench for a shared study. We will set the height to your chair and your elbow, not to a standard.
Quote a Study TableThe small piece that finishes a room. Round, square or a narrow runner for the gap between two chairs.
Send a photo of the sofa or chair it will sit beside and we will match the timber tone and the height so it reads as part of the set.
Quote a Side TableEvery category above is a starting point. The piece you get is drawn around your room: the width between the two walls, the height of the window sill, the colour of the floor it will stand on.
If you have a photo of something you like, send it. If you have a rough sketch on the back of an envelope, send that too — we work from sketches more often than from drawings.
Send your measurements, a sketch or a photo of the space. We will reply with a price, a lead time and a recommendation on timber and finish.
Fill in the form and we will reply within one working day. Prefer to chat? Message us on WhatsApp and send a photo of the space.
Request a Quote